Regulators are the most important part of your Isla Mujeres scuba diving equipment. If you seal the depths of the ocean, your life depends to a large extent on the proper functioning of your drive controller. Adequate maintenance of diving regulators ensures that you never find yourself in a difficult situation when diving. The few minutes spent cleaning and maintaining the regulator make it last for years.

The following tips will help you understand the care the regulator requires. Follow them, and your breathing will never be disturbed while you are underwater!

Dry the Protection Cap and Place It

Before cleaning the regulator, dry the dust cap and screw it on. To dry the lid against dust, you can use the air from the tank to expel the water. Or use a towel to wipe away moisture. If the lid is not properly screwed, water can enter the first stage. Therefore, make sure it is safe.

Dip the Regulator in Fresh Water

This is the simplest and most important part of maintaining your drive controller. When immersing it in fresh water, make sure that dirt particles do not adhere to the regulator. Scroll through the different regulator levers to make sure no sediment gets trapped in it. Otherwise, it will drastically reduce the useful life of your equipment. Warning: do not press the rinse button during this time.

Clean Thoroughly with a Water Jet

Soaking is good, but rinsing with a stream of water is great. In this way, it ensures that no dirt particles clog a piece. By directing a stream of water to the first and second stage of the regulator, clean it as thoroughly as possible. Just make sure that the dust cover is sealed in the meantime.

Dry Well

Allow the regulator to dry completely before placing it in a box or package. Do not place it in direct sunlight and keep it away from hot surfaces. Regulators have many rubber parts that can be damaged by heat. When finished cleaning and drying, store it in a dry and cool place.

Get Professional Help Every Year

A well-maintained regulator can work perfectly for a long time. You can extend your life by doing it every year. Most of the main diving equipment suppliers offer this service. Because the controller consists of several small components, you need someone to check them and see if they work properly. If some of them do not work as they should, you can replace them as part of your warranty agreement.

As you can see, keeping dive controllers is not a difficult or time-consuming task. But if you do not properly care for this important equipment, you may have serious problems. Therefore, it is better to follow these simple steps and keep your regulators in perfect condition.

There is probably something one can do for Isla Mujeres scuba diving, even though they are basics. In addition, you must be healthy and in good physical shape. Diving can require a …